Center Mounted Brake Lamp: Service and Repair

HIGH MOUNTED STOPLAMP







Removal and Installation
1. Remove the rear seat bolsters.
2. Position the rear quarter trim panels aside.
3. Remove the rear passenger assist handles.

CAUTION: Do not excessively lower the rear portion of the headliner. This can create creases or kinks in the headliner.

4. Position the headliner aside.
5. Remove the 2 screws and the high mounted stoplamp.
- Disconnect the electrical connector.
- To install, tighten to 5 Nm (44 lb-in).

6. To install, reverse the removal procedure.