Accelerator Pedal: Service and Repair

ACCELERATOR PEDAL

Fixed Pedal:

Adjustable Pedal:

Removal and Installation

All pedals
1. Disconnect the battery ground cable.
2. Disconnect the accelerator pedal electrical connector.
3. Remove the accelerator pedal wiring harness retainer from the accelerator pedal bracket bolt.
4. Remove the accelerator pedal wiring harness pin-type retainer from the accelerator pedal bracket.

Adjustable pedal
5. Disconnect the accelerator drive cable from the accelerator pedal.

All pedals
6. Remove the 3 accelerator pedal retaining nuts.
- To install, tighten to 9 Nm (80 lb-in).

7. Remove the accelerator pedal.
8. To install, reverse the removal procedure.

Adjustable pedal
9. Index the pedals.