Wheel Speed Sensor - Rear
Wheel Speed Sensor - RearWheel Speed Sensor - Rear:
Wheel Speed Sensor - Rear:
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the wheel speed sensor electrical connector.
3. Remove the wheel speed sensor bolt.
^ To install, tighten to 8 Nm (71 inch lbs.).
4. NOTE: Clean off all dirt and foreign material that may have collected around the rear anti-lock brake sensor before removal.
Remove the wheel speed sensor.
5. Remove the wheel speed sensor harness retainer.
6. Remove the wheel speed sensor harness pin-type retainer.
7. Remove the wheel speed sensor and harness assembly.
8. To install, reverse the removal procedure.