Speaker Walk-Around Test

SPEAKER WALK-AROUND TEST

NOTE: To enter the speaker walk-around test or audio self-diagnostic mode, the audio unit must be turned on and in radio tuner mode (AM/FM1/FM2).

1. To enter the speaker walk-around test, simultaneously press the audio unit preset buttons 3 and 6 (except navigation) or buttons MAP and DEST (navigation).
2. The speaker walk-around test stops at each speaker and applies sound to each speaker for about 1-2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR, RR, subwoofer I, subwoofer II (subwoofer II is not available on this vehicle).