Front Door Trim Panel

FRONT DOOR TRIM PANEL







Removal and Installation

NOTE: LH side shown, RH side similar.

1. Disconnect the battery ground cable.
2. Remove the window control switch plate and position it aside.
3. Disconnect the 4 electrical connectors and remove the switch plate.

4. CAUTION: Use care not to damage the trim panel covers.

Remove the 2 assist handle screw covers and the door handle cup screw cover.

5. Remove the 2 assist handle screws and the door handle cup screw.
6. Remove 3 front door trim panel screws.
7. Disconnect the 3 electrical connectors and remove the front door trim panel.
8. To install, reverse the removal procedure.