Test G: The Auto-Lock Does Not Operate Correctly

PINPOINT TEST G: THE AUTO-LOCK DOES NOT OPERATE CORRECTLY

G1-G6:

Normal Operation
The auto-locking function automatically locks all doors when all of the following conditions are concurrently met during the current key cycle:
- all the doors are closed
- the auto-locking function is active
- the ignition switch is in the ON position
- the transmission is in DRIVE or REVERSE
- the vehicle speed exceeds 5 km/h (3 mph)

After the initial activation of auto-locking and at least one door has been opened, auto-locking is activated again if the following conditions are concurrently met:
- all the doors are closed
- the auto-locking function is active
- the ignition switch is in the ON position
- the transmission is in DRIVE or REVERSE
- the vehicle speed exceeds 5 km/h (3 mph)

Possible Causes
- door ajar switches
- vehicle speed sensor (VSS) message from the instrument cluster
- digital transmission range (TR) sensor message from the instrument cluster
- driver door module (DDM)