Interior Rear View Mirror

INTERIOR REAR VIEW MIRROR

Special Tool(s):

Special Tool(s)

Removal

1. CAUTION: Twisting the interior rear view mirror base from right to left while supporting the mirror with one hand against the windshield may also result in mirror removal, but may cause a stress fracture of the windshield, depending on the age of the windshield.

Remove the wire cover (if equipped).

2. Remove the compass by pulling down on the compass rearmost edge (if equipped).







3. Insert the special tool between the mirror mount and windshield bracket from the bottom.
4. Release the mirror mount from windshield bracket by pulling the tool away from the windshield.

Installation







1. Slide the mirror mount over the windshield bracket from the top and adjust the mirror to the up position.







2. Using the special tool, press the mirror assembly downward along the windshield until the mount is seated on windshield bracket.
3. Install compass and wire cover (if equipped).