Roof Opening Panel Glass

ROOF OPENING PANEL GLASS

Removal and Installation
1. Operate the roof opening panel glass to the fully-closed position.
2. Remove the 4 roof opening panel glass screws.
- To install, tighten to 4 Nm (35 lb-in).

3. From outside the vehicle, lift and remove the roof opening panel glass.
4. Remove the roof opening panel glass seal.
- To install, position the roof opening panel glass seal seam at the center of the roof opening panel glass toward the rear of the vehicle.

5. To install, reverse the removal procedure.
- Align the roof opening panel glass.