Sunroof / Moonroof: Adjustments

ROOF OPENING PANEL ALIGNMENT







1. Release and position the 2 roof opening panel covers rearward.
2. Loosen the 4 roof opening panel glass screws.







3. Adjust the front of the roof opening panel glass edge to specification.







4. Adjust the rear of the roof opening panel glass edge to specification.
5. Tighten the 4 roof opening panel glass screws.
- Tighten to 4 Nm (35 lb-in).







6. Install the 2 roof opening panel covers.
7. Initialize the roof panel opening motor.