Radiator: Service and Repair

Radiator

Radiator:

Removal and Installation
1. Remove the cooling fan motor and shroud assembly.





2. Remove the pin-type retainers and remove the radiator sight shield.
3. Disconnect the lower radiator hose and position aside.





4. Remove the 2 bolts and the 2 radiator support brackets.
^ To install, tighten to 10 Nm (89 inch lbs.).





5. Remove the bolt, position the A/C condenser and the power steering cooler away from the radiator, and remove the radiator.
^ To install, tighten to 10 Nm (89 inch lbs.).

6. NOTE: Do not reuse hose clamps. Instead, use appropriately sized worm-style clamps in place of the constant tension clamps.

To install, reverse the removal procedure.
7. Fill and bleed the cooling system.