Test L: One Turn Signal/Hazard Lamp Is Inoperative/Always On

PINPOINT TEST L: ONE TURN SIGNAL/HAZARD LAMP IS INOPERATIVE/ALWAYS ON

L1-L3:

L3-L5:

Normal Operation
When the multifunction switch is placed in the LH or RH TURN position, voltage is routed through circuit 3 (LG/WH) or circuit 2 (WH/LB) to the LH or RH front turn signal, respectively. Ground for the turn lamps is provided through circuit 57 (BK).

Possible Causes
- Circuit 2 (WH/LB) open or short to voltage
- Circuit 3 (LG/WH) open or short to voltage
- Circuit 57 (BK) open
- Multifunction switch