Transmission Position Sensor/Switch: Adjustments

Transmission Range (TR) Sensor Adjustment

Special Tool(s):

1. With the vehicle in NEUTRAL, position it on a hoist.





2. Loosen the digital TR sensor bolts.

3. NOTE: Make sure that the manual lever is in the NEUTRAL position.





Using the special tool, align the digital TR sensor slots. The tool is designed to fit snugly.

4. CAUTION: Tightening one screw before tightening the other may cause the sensor to bind or become damaged.





Tighten the digital TR sensor bolts and remove the special tool.
^ Tighten to 9 Nm (80 inch lbs.).
5. Verify that the vehicle starts in the PARK and NEUTRAL positions and the REVERSE lamps illuminate in REVERSE.