Test K: DTC B2293 - Restraint System - Air Bag Fault
PINPOINT TEST K: DTC B2293 - RESTRAINT SYSTEM - AIR BAG FAULTK1:
K2:
K2-K4:
K5-K7:
K7-K8:
K9-K11:
K11-K12:
K13-K15:
K15-K16:
K17-K19:
K19-K20:
K20-K22:
K22-K24:
K24-K25:
K26-K28:
K28-K29:
K30-K32:
K32-K33:
K34-K36:
K36-K37:
K38:
K38-K39:
Lamp Fault Codes (LFCs)
The lamp fault codes (LFCs) indicate the specific flagged faults associated with diagnostic trouble code (DTC) B2293:
Normal Operation
The front air bags will deploy upon receiving a flow of current from the restraints control module (RCM).
The RCM checks all of the front air bag circuits for faults. If the RCM detects one of the following faults on any of the front air bag circuits, it will store DTC B2293 in memory, and depending on the fault, flash a LFC on the air bag indicator.
Fault Conditions
The RCM monitors for the following fault conditions:
- Low resistance
- High resistance or circuit open
- Circuit short to voltage
- Circuit short to ground
Possible Causes
A driver air bag fault can be caused by:
- wiring, terminals or connectors.
- a faulty clockspring.
- a faulty driver air bag module.
- a faulted RCM.