Transmission Speed Sensor: Service and Repair

Turbine Shaft Speed (TSS) Sensor and Output Shaft Speed (OSS) Sensor

Removal and Installation

Turbine Shaft Speed (TSS) Sensor and Output Shaft Speed (OSS) Sensor:

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the output shaft speed (OSS) or turbine shaft speed (TSS) sensor electrical connector.





3. Remove the OSS or TSS sensor bolt and the sensor.
1 Remove the bolt and the TSS sensor.
- To install, tighten to 11 Nm (8 ft. lbs.).
2 Remove the bolt and the OSS sensor.
- To install, tighten to 12 Nm (9 ft. lbs.).
4. To install, reverse the removal procedure.