Front Door Window Regulator: Service and Repair

FRONT DOOR WINDOW REGULATOR AND MOTOR

Special Tool(s):

Special Tool(s)

Removal and Installation
1. Remove the front door window glass.






2. Remove the rivets and the front door latch remote control.
- Disconnect the actuator rod.

3. Disconnect the front door window regulator motor electrical connector.
4. Remove the 2 front door window regulator nuts.
- To install, tighten to 12 Nm (9 lb-in).

5. Remove the 5 front door window regulator and motor rivets.
6. Remove the front door window regulator and motor.
7. To install, reverse the removal procedure.
- sing the special tool, install the rivets.