Fluid - M/T: Service and Repair

Transaxle Draining and Filling

Material:

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the drain plug and drain the fluid.
^ Position a drain pan under the transaxle.
3. Install a new washer and the drain plug.
^ Tighten to 49 Nm (36 ft. lbs.).

4. NOTE: Prior to removal, clean the area of the fill plug.

Remove the fill plug.

5. NOTE: Do not overfill the transaxle. This will cause transaxle fluid to be forced out of the case.





Fill the transaxle will the recommended fluid.
6. Install a new washer and fill plug.
^ Tighten to 49 Nm (36 ft. lbs.).