Windows: Description and Operation

GLASS, FRAMES AND MECHANISMS

The glass, frames and mechanisms consist of the following:
- Window regulators
- Door window regulator motors
- Front door glass top run
- Front door window glass
- Rear door window glass
- Rear window glass
- Rear fixed window glass
- Rear window regulator and motor - run and brackets
- Window control switches
- Accessory delay relay
- Smart junction box (SJB)
- Windshield glass
- Heated rear window grid
- Heated rear window grid relay

The glass, frames and mechanisms include the following:
- Standard plastic and laminate safety glass
- Windshield glass which is bonded to the opening flange with a urethane sealant
- Standard power windows which include one-touch up, one-touch down and lock-out feature (left front only)

The window regulator control switch:
- is located on each door trim panel.
- may be used to raise or lower all windows from the left front window control switch or the individual side window from the corresponding individual door switch.
- can lock out passenger front and rear window control switches when the lock-out switch on the left front window control switch is turned ON.
- can manually lower the driver side window when the left front window control switch is pressed and held in the DOWN position.
- can automatically lower the driver side window when the left front window control switch is momentarily pressed to the DOWN position and released.

Zephyr Only
The smart junction box (SJB) sends a defined pulse signal on the global open/close circuit to both front door window motors to open or close the windows based on a signal received from the remote keyless entry (RKE) transmitter or door key cylinder. If the accessory delay relay is active, the global open/close feature will not operate.