Test D: DTC P0833 - Clutch Pedal Switch B Circuit

PINPOINT TEST D: DTC P0833 - CLUTCH PEDAL SWITCH B CIRCUIT

D1-D3:

D4-D5:

Normal Operation
Vehicles equipped with a manual transaxle have an additional clutch pedal speed control deactivator switch. The powertrain control module (PCM) sends a signal through circuit CE904 (GN/VT) to the clutch pedal speed control deactivator switch. The return signal is sent to the PCM through circuit RE407 (YE/VT).

DTC P0833 - sets when there is an open in the clutch pedal speed control deactivator switch circuits.

Possible Causes
- Circuit CE904 (GN/VT) open
- Circuit RE407 (YE/VT) open
- Clutch pedal speed control deactivator switch
- PCM