Rear Door: Adjustments
DOOR ADJUSTMENT - REAR1. Remove the B-pillar trim panel.
2. Mark the positions of the rear door hinges to use as reference points.
3. Loosen the 2 lower exterior rear door hinge-to-body bolts and nut just enough to permit movement.
4. Loosen the upper interior rear door hinge-to-body nut just enough to permit movement.
5. Loosen the exterior upper rear door hinge-to-body bolt just enough to permit movement.
6. Adjust the rear door to specification.
7. Tighten the 3 rear hinge-to-door bolts and 2 nuts.
- Tighten to 30 Nm (22 lb-ft).
8. Check the front door adjustments.
9. Install the B-pillar trim panel.