Seat Cushion - Rear

SEAT CUSHION - REAR







Removal and Installation

1. CAUTION: Do not force the latches or cushion to release. Applying excessive force to release the rear seat cushion latches can damage them.

NOTE: Make sure the 2 rear cushion latches are fully disengaged before raising the seat cushion to avoid damaging the latches.

Fully release the 2 latches and slightly raise the rear seat cushion front edge to disengage from the floor.

2. Push the rear seat cushion slightly rearward to disengage the rear edge of the cushion from the rear retainers and remove.
- To install, position the rear seat cushion frame wire over the rear retainers.

3. To install, reverse the removal procedure.
- Make sure the safety belts and buckles are accessible to the occupants after installation.