Operation CHARM: Car repair manuals for everyone.

External Controls

External Controls
The manual transaxle external controls consists of the following:
- Gearshift lever
- Gearshift lever knob and boot
- Gearshift cables

The manual transaxle is controlled by a floor-mounted gearshift lever located in the floor console. Connection between the floor mounted gearshift lever and the manual transaxle gearshift control assembly is made through 2 gearshift cables.

When the operator moves the floor mounted gearshift lever, that movement is transmitted through 2 gearshift cables routed through the body to the transaxle. The 2 gearshift cables are attached to the transaxle at the gearshift control assembly. The gearshift control assembly transfers the movement of the gearshift cables to the shift rods and shift forks located inside the transaxle. Removal and installation of the gearshift cables requires specific adjustments for correct shifting of the transaxle.