Test M: The Heated Seat Is Inoperative - Passenger, Does Not Operate In High
PINPOINT TEST M: THE HEATED SEAT IS INOPERATIVE - PASSENGER, DOES NOT OPERATE IN HIGHM1-M2:
M2-M3:
Normal Operation
The driver heated seat module receives battery voltage feed on circuit 1048 (LB/WH), ignition voltage feed on circuit 1040 (RD/BK) and is supplied ground on circuit 676 (PK/OG). When the heated seat control switch is pressed with the ignition switch in RUN or START, a ground signal is sent to the heated seat module on circuit 581 (RD) to command the system ON or OFF in HI heat mode.
Possible Causes
A passenger heated seat that does not operate in HI can be caused by:
- faulty wiring, terminals or connectors.
- a faulty heated seat switch.
- a faulty heated seat module.