Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2007 >> Town Car V8-4.6L VIN V Flex Fuel >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Driver Seat Module (DSM)

Driver Seat Module (DSM)

DRIVER SEAT MODULE (DSM)







Removal and Installation

NOTE: Prior to removal of the module, it is necessary to upload the module configuration information to a scan tool. This information needs to be downloaded into the new module once installed.

1. NOTE: A new DSM is delivered in a manufacturing mode with a pre-set DTC of B2477. This DTC will clear when the module has been successfully configured (or PMI). DTC B2477 may need to be cleared after a successful configuration (or PMI).

Remove the driver seat.

2. Remove the 2 screws.
3. Disconnect the electrical connectors.
4. Remove the DSM from the seat bracket.

5. NOTE: Once the new module is installed, it is necessary to download the module configuration information from the scan tool into the new module.

To install, reverse the removal procedure.
pro multis · About Operation CHARM