Test G: The Autolock Does Not Operate Correctly

PINPOINT TEST G: THE AUTOLOCK DOES NOT OPERATE CORRECTLY

G1-G6:

Normal Operation
The autolocking function automatically locks all doors when all of the following conditions are concurrently met during the current key cycle:
- All the doors are closed.
- The autolocking function is active.
- The ignition switch is in the ON position.
- The transmission is in DRIVE (D) or REVERSE (R).
- The vehicle speed exceeds 5 km/h (3 mph).

After the initial activation of autolocking and at least one door has been opened, autolocking is activated again if the following conditions are concurrently met:
- All the doors are closed.
- The autolocking function is active.
- The ignition switch is in the ON position.
- The transmission is in DRIVE (D) or REVERSE (R).
- The vehicle speed exceeds 5 km/h (3 mph).

Possible Causes
- Vehicle speed sensor (VSS) message from the instrument cluster
- Digital transmission range (TR) sensor message from the instrument cluster
- Driver door module (DDM)