Instrument Cluster (IC)

INSTRUMENT CLUSTER







Removal and Installation

1. NOTE: If installing a new instrument cluster, it is necessary to upload the instrument cluster configuration information to the scan tool.

Remove the instrument cluster finish panel.

2. Depower the supplemental restraint system (SRS).

3. NOTE: Release the upper steering column shroud by pressing the sides inward.

Remove the upper steering column shroud.

4. Remove the screw and the transmission range indicator from the steering column.
- Disconnect the transmission range indicator cable from the shift selector arm.

5. Remove the 4 screws and the instrument cluster.
- Disconnect the electrical connector.

6. To install, reverse the removal procedure.
- If a new instrument cluster was installed, download the instrument cluster configuration information from the scan tool into the new instrument cluster.