EGR Tube: Service and Repair

EXHAUST GAS RECIRCULATION (EGR) SYSTEM MODULE TUBE

Part 1:

Part 2:

Exploded View







Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 bolts and the intake manifold shield.
- To install, tighten to 12 Nm (9 lb-ft).

3. Disconnect the tube fitting at the exhaust gas recirculation (EGR) system module.
- To install, tighten to 40 Nm (30 lb-ft).

4. Disconnect the EGR tube nut at the exhaust manifold.
- To install, tighten to 40 Nm (30 lb-ft).

5. Remove the EGR tube from the vehicle.
6. To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.