Dome Lamp: Service and Repair
Interior Lamp
NOTE: Overhead console with roof opening panel shown, other consoles similar.
Removal and Installation
1. NOTE: Do not pull-down on the front of the overhead console.
Pull-down on the rear of the overhead console to remove the overhead console from the retaining clips.
- Disconnect the electrical connectors.
2. Release the 4 retaining clips, and remove the lamp assembly from the overhead console.
3. Release the 6 retaining clips, and remove the lens from the lamp assembly.
- NOTE: The bulbs can be pushed out from the backside of the lamp assembly.
Replace the bulb(s) as necessary.
4. To install, reverse the removal procedure.