Toe Adjustment - Front

Toe Adjustment - Front

1. Using alignment equipment and the manufacturer's instructions, measure the front toe.

2. Start the engine and center the steering wheel.

3. Turn the engine OFF and, using a suitable steering wheel holding device, lock the steering wheel in the straight-ahead position.

4. Remove the steering gear bellows clamps.





5. Loosen the nuts.





6. NOTE: Do not allow the steering gear bellows to twist when the tie rod is rotated.

Rotate the tie rods as necessary to adjust the toe setting.

7. Tighten the tie-rod jam nuts to 63 Nm (46 lb-ft).





8. Install the steering gear bellows clamps.

9. Recheck the toe settings and adjust as necessary.