52500 MI or 84000 KM

Lubricate
    Control Arm
      Lubricate as needed if equipped with Zerk fittings for Special Operating Conditions O.
    Ball Joint
      Lubricate as needed if equipped with Zerk fittings for Special Operating Conditions O.
Inspect
    Vehicle
      Check and top up fluid levels: brake, coolant recovery reservoir, manual and automatic transmission (if equipped with an underhood dipstick), power steering and window washer. Inspect tires for wear and check air pressure, including spare. Check exhaust system for leaks, damage, loose parts, and foreign material. Check battery performance. Check operation of horn, exterior lamps, turn signals and hazard warning lights. Check radiator coolers, heater and air conditioning hoses. Inspect windshield washer spray and wiper operation. Check windshield for cracks, chips and pitting. Inspect for oil and fluid leaks. Inspect engine air filter. Inspect half shaft dust boots, if equipped. Check shocks and struts and other suspension components for leaks and damage. Inspect steering linkage. Inspect accessory drive belt(s). Inspect clutch operation. if equipped.
    Universal Joint, Half Shaft/Short Shaft
      Inspect and lubricate U-joints as required, if using Special Operating Conditions O.
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate U-joints as required, if using Special Operating Conditions O.
Replace
    Oil Filter, Engine
      Change engine oil filter every 7,500, if using Special Operating Condition E.
    Engine Oil
      Change engine oil every 7,500, if using Special Operating Condition E.
    Cabin Air Filter / Purifier
      Replace as required if equipped, for Special Operating Conditions I, D and O.