Ignition Lock Cylinder Housing

Ignition Lock Cylinder Housing

NOTE: Steering wheel shown removed for clarity.










Removal and Installation

1. Remove the instrument cluster finish panel.

2. Remove the 2 screws and the tambour door assembly.

3. Remove the ignition lock cylinder housing.

1. Remove the 3 ignition lock cylinder housing screws.

2. Disconnect the electrical connectors.

4. To install, reverse the removal procedure.
- The new PATS keys must be programmed. For additional information, refer to Key Programming Using Diagnostic Equipment - Integrated Keyhead Transmitter (IKT) in Antitheft and Alarm Systems. Integrated Keyhead Transmitter (IKT)