Seat Backrest Cover - Rear, 40 Percent

Seat Backrest Cover - Rear, 40 Percent

Removal and Installation

1. Remove the 40 percent rear seat backrest. For additional information, refer to Seat Backrest - Rear Rear Seat.

2. Release the lower J-strip, 4 J-clips and remove the staples from each side.

3. NOTICE: Use care when separating the backrest trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the backrest foam pad.

Partially invert the trim cover separating the hook-and-loop strips and remove the first row of hog rings.

4. Continue to invert the backrest trim cover separating the hook-and-loop strips and removing all rows of hog rings working up the backrest.

5. Remove the backrest trim cover.

6. To install, reverse the removal procedure.