90000 MI or 144000 KM
InspectVehicle
Recommended Multi-point Inspection
Universal Joint, Drive/Propeller Shaft
Inspect and lubricate driveshaft and u-joints, (lubricate if equipped with Zerk fittings).
Tie Rod End
Inspect and lubricate, (lubricate if equipped with Zerk fittings).
Steering and Suspension
Inspect and lubricate steering linkage and suspension, (lubricate if equipped with Zerk fittings).
Fluid - A/T
Inspect automatic transmission fluid level (if equipped with an underhood dipstick).
Exhaust System
Inspect exhaust system and heat shields.
Drive Belt
Inspect drive belt(s).
Cooling System
Every 15,000 miles (24,000 km), 600 hours of engine operation or as indicated by the instrument cluster message center
Constant Velocity Joint Boot
If equipped.
Brakes and Traction Control
Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system.
Ball Joint
Inspect and lubricate, (lubricate if equipped with Zerk fittings).
Replace
Spark Plug
Oil Filter, Engine
Filters
Climate-controlled seat filter
Engine Oil
Cabin Air Filter / Purifier
Replace if equipped.
Air Filter Element
Replace engine air filter (except Focus with PZEV engine).
Rotate
Tires
Rotate tires, inspect for wear, measure tread depth and inspect wheel ends for end play and noise. Vehicles with dual rear wheels should only rotate if unusual wear is noted. For vehicles with different front-to-rear tire pressures, the tire pressure must be adjusted and the tire pressure sensor training must be done.