Grille: Service and Repair

Radiator Grille Opening Panel Reinforcement









Removal and Installation

1. Remove the 5 pin-type retainers and the radiator sight shield.

2. Remove the pin-type retainer and the grille opening panel reinforcement cover.

3. Remove the front bumper cover.

4. Remove the headlamps.

5. Remove the 6 radiator grille opening panel bolts.
- To install, tighten to 6 Nm (53 lb-in).

6. Remove the 4 radiator grille opening panel bracket bolts.
- To install, tighten to 6 Nm (53 lb-in).

7. To install, reverse the removal procedure.