Operation CHARM: Car repair manuals for everyone.

Headlamp: Service and Repair




Headlamp Assembly



















Removal and Installation

NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.

1. Remove the 5 pin-type retainers and the radiator air deflector.

2. Remove the 3 bolts and the headlamp assembly.
- Disconnect the electrical connector.

- To install, tighten to 5 Nm (44 lb-in).

3. To install, reverse the removal procedure.
- If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment Adjustments.