Spark Plugs

Spark Plugs

Removal and Installation

1. Remove the ignition coil-on-plugs. For additional information, refer to Ignition Coil-On-Plug Ignition Coil-On-Plug.

2. NOTICE: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.

NOTE: Use compressed air to remove any foreign material from the spark plug well before removing the spark plugs.

Remove the spark plugs.

- To install, tighten to 18 Nm (159 lb-in).

3. Inspect the spark plugs.

4. To install, reverse the removal procedure.
- Adjust the spark plug gap on gasoline engines to 1.32-1.42 mm (0.052-0.056 in).

- Adjust the spark plug gap on flexible fuel engines to 1.04-1.19 mm (0.041-0.047 in).