Safety Belt Tongue Rotated on Belt

Safety Belt Tongue Rotated on Belt

1. Grasp the belt tongue and pull the belt webbing down to form a loop through the upper (longer and narrower) slot in the tongue.





2. Rotate and fold the belt webbing over itself within the slot to remove the twist.

3. Pull the excess belt webbing back through the upper slot in the belt tongue.

4. Grasp the belt tongue and pull the belt webbing up to form a loop through the lower slot in the tongue.

5. Rotate and fold the belt webbing over itself within the slot to remove the twist.





6. Pull the excess belt webbing through the slot.