Wiper Arm: Service and Repair

Wiper Mounting Arm and Pivot Shaft

Removal

1. Disconnect the battery.

2. Remove the cowl panel grilles.

3. Remove the nuts, the bolts and position the wiper mounting and pivot shaft assembly aside.

4. Disconnect the electrical connector and remove the wiper mounting arm and pivot shaft assembly.

Installation

1. Position the wiper mounting arm and pivot shaft assembly.
- Connect the electrical connector.

2. Install the wiper mounting arm and pivot shaft assembly nuts and bolts.
- Tighten to 12 Nm (106 lb-in).

3. Install the cowl panel grilles.

4. Connect the battery.

5. Check the wiper pivot arm adjustment. For additional information, refer to Wiper Blade and Pivot Arm Adjustment Adjustments.