Operation CHARM: Car repair manuals for everyone.

Anti-Theft - Passive Anti-Theft System (PATS) - Passive Start Antenna - Console, Rear




Passive Start Antenna - Console, Rear









Removal and Installation

1. Remove the floor console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. Remove the 4 bolts and the floor console air duct.

3. Disconnect the rear console passive start antenna electrical connector.

4. Remove the 2 screws and the rear console passive start antenna.

5. To install, reverse the removal procedure.