Exterior Mirror Glass

Exterior Mirror Glass

Removal

1. Position the exterior mirror glass to the full upward and inward position.

2. WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.

NOTE: RH mirror and motor removed from the housing and viewed from the back to show location of clips and placement of screwdriver.

Remove the exterior mirror glass using a screwdriver to release the tabs starting at the lower outboard side of the mirror and continuing to the lower inboard tab.
Remove the exterior mirror glass.





3. Disconnect the electrical connectors.

Installation

1. Connect the electrical connectors.

2. Position the exterior mirror glass onto the exterior mirror motor.

3. WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.

NOTICE: Apply hand pressure directly over the center of the exterior mirror glass. Failure to follow this instruction may result in glass breakage.

Place a hand against the back of the exterior mirror and a hand flat against the exterior mirror glass.
- Position the exterior mirror glass to the full lower inboard position and press the exterior mirror glass to fully seat the retaining tab onto the exterior mirror motor.

- Position the exterior mirror glass to the full lower outboard position and press the exterior mirror glass to fully seat the retaining tab onto the exterior mirror motor.

- Position the exterior mirror glass to the full upper outboard position and press the exterior mirror glass to fully seat the retaining tab onto the exterior mirror motor.