Seat Backrest Heater Mat - Rear

Seat Backrest Heater Mat - Rear

Removal

NOTE: Always install a new backrest foam pad and backrest heater mats together.

1. Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Rear Rear Seat.

2. Disconnect the 2 backrest heater mat electrical connectors.

3. Remove the hog rings and separate the backrest frame from the backrest foam pad.
- Discard the backrest foam pad with heater mats.

4. Obtain a new backrest foam pad and new LH and RH backrest heater mat.
- Do not remove the old backrest heater mats from the old backrest foam pad and reuse any of these parts.

Installation

NOTE: Always install a new backrest foam pad and backrest heater mats together.

1. Install new backrest heater mats onto the new backrest foam pad.

1. Remove the paper strips from the cushion heater mat and adhere to the cushion foam pad, laying it flat with no wrinkles.

2. Route the backrest heater mat wire harness and electrical connector through the backrest foam pad to the other side.





2. Position the backrest frame into the backrest foam pad and install hog rings.

3. Connect the 2 backrest heater mat electrical connectors.

4. Install the seat backrest cover. For additional information, refer to Seat Backrest Cover - Rear Rear Seat.