Pinpoint Test D: The Power Seat Does Not Make Full Travel

Seats

Pinpoint Tests

Pinpoint Test D: The Power Seat Does Not Make Full Travel

Normal Operation

The power seat should travel fully horizontal (forward/backward) and vertical (front up/down and rear up/down).

This pinpoint test is intended to diagnose the following:
- Seat track obstruction
- Seat track



PINPOINT TEST D: THE POWER SEAT DOES NOT MAKE FULL TRAVEL

NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition is ON.

NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

-------------------------------------------------
D1 CHECK FOR AN OBSTRUCTION IN THE SEAT TRACK


- Remove the affected seat. Refer to Seat - Front Seat - Front.
- Are there any obstructions in the track?

Yes
REMOVE the obstruction(s).

INSTALL the seat. TEST the system for normal operation.

No
IDENTIFY the cause and REPAIR as necessary.

INSTALL the seat. TEST the system for normal operation.

-------------------------------------------------