Operation CHARM: Car repair manuals for everyone.

Brake Lamp: Service and Repair




Rear Lamp Assembly









Removal and Installation

1. Remove the luggage compartment scuff plate and position the luggage compartment side trim panel aside.

2. Remove the rear lamp assembly in the following sequence:

1. Remove the 3 nuts and separate the rear lamp assembly from the vehicle.
- To install, tighten to 6 Nm (53 lb-in).

2. Separate the reversing lamp bulb holder from the rear lamp assembly.

3. Disconnect the electrical connectors and remove the rear lamp assembly.

3. To install, reverse the removal procedure.