Exterior Mirror

Exterior Mirror

Removal and Installation

NOTE: Do not remove the exterior mirror assembly when repairing an individual part. Individual components can be installed without removing the exterior mirror.

1. Remove the LH sail panel.
- Pull the sail panel outward to release the retaining clips.

- Disconnect the electrical connector.





2. Disconnect the exterior mirror electrical connector.

3. Remove the 2 exterior mirror nuts.
- To install, tighten to 12 Nm (106 lb-in).

4. Remove the exterior mirror bolt.
- To install, tighten to 12 Nm (106 lb-in).

5. Remove the exterior mirror.

6. To install, reverse the removal procedure.
- To install, make sure to align the sail panel retaining clips to the retaining clip holes in the door.