Front Controls Interface Module (FCIM)

Front Controls Interface Module (FCIM) - MKZ

Floor Console and Instrument Panel Components









Removal and Installation

1. Remove the LH and RH floor console finish mouldings. For additional information, refer to Console - Floor, MKZ in Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. Remove the instrument panel finish moulding. For additional information, refer to Instrument Panel - Exploded View in Instrument Cluster / Carrier &/or Interior Moulding / Trim.

3. Remove the 4 screws and the Front Controls Interface Module (FCIM).
- Disconnect the electrical connectors.





4. Remove the 8 screws and separate the Audio Control Module (ACM) from the FCIM.

5. To install, reverse the removal procedure.