Exterior Mirror Glass

Exterior Mirror Glass

Removal

1. Position the exterior mirror glass in the full down position.

2. WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.
Pull the upper edge of the exterior mirror glass outward and then upward to release the locking tabs from the exterior mirror motor.





3. NOTE: Heated mirror with blind spot monitoring shown.

If equipped with auto-dimming (LH side only)/heated/blind spot monitoring mirrors, disconnect the electrical connectors from the exterior mirror glass.





Installation

1. NOTE: Heated mirror with blind spot monitoring shown.

If equipped with auto-dimming (LH side only)/heated/blind spot monitoring mirrors, connect the electrical connectors to the exterior mirror glass.





2. Install the lower exterior mirror glass onto the exterior mirror motor.

3. Position the exterior glass upward.

4. WARNING: Place a shop towel between the hands and the exterior mirror glass for protection in case of glass breakage during mirror service. Failure to follow this instruction may result in serious personal injury.

NOTE: An audible click will be heard during installation.
Place a hand against the back of the exterior mirror and a hand flat against the upper exterior mirror glass and press the exterior mirror glass into the upper exterior mirror motor retainers.