Pinpoint Test G: The Power Seat Does Not Make Full Travel

Seats

Pinpoint Tests

Pinpoint Test G: The Power Seat Does Not Make Full Travel

Normal Operation

The power seat should travel fully horizontal (forward/rearward) and vertical (front up/down and rear up/down).

This pinpoint test is intended to diagnose the following:
- Obstruction
- Seat track



PINPOINT TEST G: THE POWER SEAT DOES NOT MAKE FULL TRAVEL

NOTE: The air bag warning indicator illuminates when the correct Restraints Control Module (RCM) fuse is removed and the ignition switch is ON.

NOTE: The Supplemental Restraint System (SRS) must be fully operational and free of faults before releasing the vehicle to the customer.

-------------------------------------------------
G1 CHECK FOR AN OBSTRUCTION IN THE SEAT TRACK


- Ignition OFF.
- Remove the seat. Refer to Seat - Front Seat - Front.
- Check the seat track for any obstructions.
- Is the seat track clear of obstructions?

Yes
IDENTIFY the cause and REPAIR as necessary.

REPOWER the SRS. REFER to Restraint Systems. TEST the system for normal operation.

No
REMOVE the obstruction(s). INSTALL the seat.

REPOWER the SRS. REFER to Restraint Systems. TEST the system for normal operation.

-------------------------------------------------