Filling and Bleeding with Radiator Refiller

Cooling System Draining, Filling and Bleeding










Filling and Bleeding with RADIATOR REFILLER

1. NOTICE: Early build vehicle (built before July 6, 2009) cooling systems are filled with Motorcraft(R) Premium Gold Engine Coolant. Late build vehicle (built on or after July 6, 2009) cooling systems are filled with Motorcraft(R) Specialty Green Engine Coolant. Mixing coolant types degrades the corrosion protection of the coolant. Do not mix coolant types. Failure to follow these instructions may result in engine or cooling system damage.

NOTICE: Genuine Mazda(R) Extended Life Coolant and Motorcraft(R) Specialty Green Engine Coolant are very sensitive to light. Do NOT allow these products to be exposed to ANY LIGHT for more than a day or two. Extended light exposure causes these products to degrade.

Install the RADIATOR REFILLER and follow the manufacturer's instructions to fill and bleed the cooling system.

- Recommended coolant concentration is 50/50 ethylene glycol to distilled water.
- Maximum coolant concentration is 60/40 for cold weather areas.

- Minimum coolant concentration is 40/60 for warm weather areas.