Hood Latch Release Handle

Hood Latch Release Handle

Removal and Installation

1. Remove the LH fender splash shield. For additional information refer to Doors, Hood and Trunk.

2. Remove the hood latch. For additional information, refer to Hood Latch Hood Latch.

3. Remove the LH A-pillar lower trim panel.

4. Remove the 2 hood latch release handle screws.

5. Release the hood latch release handle and cable grommet from the dash panel.

6. Release the 2 cable locators and remove the hood latch release handle and cable.

7. To install, reverse the removal procedure.