Pinpoint Test B: The Selector Lever Is Out Of Correct Gear Relationship

External Controls

Pinpoint Tests

PINPOINT TEST B: THE SELECTOR LEVER IS OUT OF CORRECT GEAR RELATIONSHIP

-------------------------------------------------
B1 CHECK THE SELECTOR LEVER COMPONENTS FOR DAMAGE


- Gain access to the selector lever components.
- Ignition In ACC.
- Apply the brake pedal.
- Observe all selector lever components while moving the selector lever through all ranges.
- Are any of the components damaged?

Yes
REPAIR as necessary. REINSTALL all components. TEST the system for normal operation.

No
GO to B2.

-------------------------------------------------
B2 CHECK THE SELECTOR LEVER CABLE AND BRACKET INSTALLATION


- Check to make sure the selector lever cable and bracket installation is correct. Refer to Selector Lever Cable and Bracket Service and Repair.
- Is the selector lever cable and bracket installed correctly?

Yes
GO to B3.

No
REINSTALL the selector lever cable. GO to B3 .

-------------------------------------------------
B3 CHECK THE SELECTOR LEVER CABLE ADJUSTMENT


- Check to make sure the selector lever cable adjustment is correct. Refer to Selector Lever Cable Adjustment Selector Lever Cable Adjustment.
- Is the selector lever cable adjusted correctly?

Yes
GO to B4.

No
ADJUST the selector lever cable. GO to B4 .

-------------------------------------------------
B4 CHECK THE SELECTOR LEVER INDICATOR ADJUSTMENT


- Check to make sure the selector lever indicator adjustment is correct. Refer to Selector Lever Indicator Adjustment Adjustments.
- Is the selector lever indicator adjusted correctly?

Yes
GO to B5.

No
ADJUST the selector lever indicator. GO to B5 .

-------------------------------------------------
B5 CHECK THE TR SENSOR ADJUSTMENT


- Check to make sure the Transmission Range (TR) sensor adjustment is correct. Refer to Automatic Transmission/Transaxle &/or Transmission Control Systems.
- Is the TR sensor adjusted correctly?

Yes
REFER to Automatic Transmission/Transaxle &/or Transmission Control Systems for internal transmission repair.

No
ADJUST the TR sensor. TEST the system for normal operation. If the condition returns, REFER to Automatic Transmission/Transaxle &/or Transmission Control Systems for internal transmission repair.

-------------------------------------------------