Front Door: Service and Repair

Door

NOTE: Front door shown, rear door similar.











Removal and Installation

1. Remove the door check arm-to-body bolt.
- To install, tighten to 25 Nm (18 lb-ft).

2. NOTICE: To avoid damaging the door, this step requires an assistant.

NOTE: To minimize the possibility of cross threading, hand start all fasteners during the installation.

Mark the position of each hinge and remove the hinge-to-door bolts.

- To install, tighten to 30 Nm (22 lb-ft).

3. Remove the front door.

4. To install, reverse the removal procedure.
- If necessary, align the door. For additional information, refer to Door Alignment - Front Door Alignment - Front or Door Alignment - Rear Adjustments.